Exhaust System Removal/Installation - Yamaha V star 1100 Owner's Manual

AIR/FUEL, EXHAUST AND EMISSION CONTROL SYSTEMS
106
1. Hanger bolt
2. Muffler assembly
3. Muffler gasket
4. Clamp screw
5. Rear exhaust pipe
6. Bolt
7. Heat shield clamp gasket
8. Exhaust gasket
b. Disconnect the connector from the solenoid
valve (B, Figure 102).
c. Connect the positive test lead of an ohmmeter
to the brown terminal (A, Figure 105) in the
solenoid. Connect the negative test lead to the
black terminal (B, Figure 105).
d. Replace the solenoid if the resistance is out-
side the range specified in Table 2.
EXHAUST SYSTEM
9. Exhaust manifold
10. Nut
11. Front exhaust pipe
12. Exhaust cover
13. Nut
14. Washer
15. Washer
16. Screw
5. Check the circuit wiring and grounds from the
battery, through the main fuse, main switch, igni-
tion fuse and to the EVAP solenoid valve.
Removal/Installation
Refer to Figure 106.
EXHAUST SYSTEM
237
8