Rider Floorboards Disassembly/Assembly - Yamaha V star 1100 Owner's Manual

388
24
6. Installation is the reverse of removal. Note the
following:
a. Set each neck cover into place on the frame.
Make sure the top edges of the covers are
properly mated.
b. Once both covers are properly in place, install
the neck cover screws (Figure 23) and the
fuel tank grommets (A, Figure 22).
RIDER FLOORBOARDS
1. Floorboard pad
2. Screw
3. Floorboard
4. Mole
5. Spring
6. Circlip
7. Bracket bolt
8. Floorboard bracket
9. Pivot pin
Disassembly/Assembly
Refer to Figure 24.
1A. Remove the brake pedal/footrest assembly as
described in Chapter Thirteen.
CHAPTER FOURTEEN
RIDER FLOORBOARDS