Fujitsu Eternus DX60 S2 User Manual page 117

Chapter 5 Setup
5.2 ETERNUS DX Disk Storage System Monitoring Setup
■ When using SNMP v2c/v3
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
(1)
Set basic interface for SNMP Agent
(1) Click the [Basic Interface] link on the left of the screen.
The basic interface setting screen appears.
(2) Select "Enable" for "SNMP Function" and then set the required items.
Select the LAN port that was set up in
(2)
Set SNMP Manager
(1) Click the [Manager] link on the left of the screen.
The manager setting screen appears.
(2) Click the [Add] button in the "Manager List" field.
The "Set Manager" field appears.
Copyright 2014 FUJITSU LIMITED
Step 1 for "LAN Port used for SNMP".
117
P3AM-5502-05ENZ0