Fujitsu Eternus DX60 S2 User Manual page 96

Chapter 5 Setup
5.1 Basic Setup
2-3
3
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
Click the [OK] button.
The RAID group is created, and the [Create Volume] screen appears.
Create Volume.
Create a volume (area in the disks in the RAID group) in a RAID group.
For regions other than EMEA&I, this setting is not required when the
IMPORTANT
volumes are set with the factory default settings. To change the
factory default settings, delete the factory settings (LUN mapping
and volumes) and then create your own volumes. For details on
deleting factory settings, refer to "ETERNUS Web GUI User's
Guide".
CAUTION
•
Copyright 2014 FUJITSU LIMITED
Do Not
Do not uninstall the disks that are installed by default or move
them to any other slot.
Contact your sales representative or maintenance engineer if
disks that are installed by default need to be uninstalled or
moved to another slot.
96
P3AM-5502-05ENZ0