Figure 1.3 Lan Connection Example - Fujitsu Eternus DX60 S2 User Manual

Chapter 1 Preparation
1.1 Connection Preparation
This section provides connection example and explains the necessary preparation.
• For the ETERNUS DX Disk storage system, one IP address for the MNT port is required.
• An IP address is required for a PC terminal that is used for maintenance operations
performed by a maintenance engineer.
• Network devices such as LAN switches are required for operation management.
• Two enhanced Cat-5 twisted-pair type LAN cables are required to connect the ETERNUS DX
Disk storage system to the LAN for operation management.
Figure 1.3
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
SNMP
Administration
terminal
manager
LAN switch
IP:x.x.x.a
CM#0
Controller enclosure
ETERNUS DX Disk storage system
LAN connection example
Copyright 2014 FUJITSU LIMITED
Mail server NTP server
LAN for operation management
CM#1
: Enhanced Cat-5 twisted-pair type LAN cables
17
AIS Connect
Remote support
center
P3AM-5502-05ENZ0