Completion Of The Eternus Dx Disk Storage System Setup And Power Off - Fujitsu Eternus DX60 S2 User Manual

Chapter 5 Setup

5.6 Completion of the ETERNUS DX Disk Storage System Setup and Power Off

■
Display volume status
On the Volume Status screen of ETERNUS Web GUI, the status of volumes that you have
registered is displayed. Check if volumes are set correctly.
5.6 Completion of the ETERNUS DX Disk Storage
System Setup and Power Off
After completing the previous setup procedure, the ETERNUS DX Disk storage system setup is
complete.
To turn off the ETERNUS DX Disk storage system, perform one of the procedures below.
• Via the Power switch
Press the Power switch to turn off the ETERNUS DX Disk storage system.
• Via the power synchronized unit
Use the power synchronized unit to turn off the ETERNUS DX Disk storage system.
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
128
Copyright 2014 FUJITSU LIMITED P3AM-5502-05ENZ0