Fujitsu Eternus DX60 S2 User Manual page 57

Chapter 3 Rack Installation
3.3 Installing Drive Enclosure
Procedure
1
■ For the EMEA&I region
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
Attach the rack rails to the rack.
(1)
Attach the 2U Bracket to the left rear rack pillar.
The M5 centering screws should be inserted in the 1st and 6th holes above the base
line of the drive enclosure.
2U Bracket
(2)
Insert the pins of the left slide rail in the 1st and 3rd holes from the bottom of the 2U
Bracket.
(3)
Secure the left slide rail to the front pillar using the M5 centering screw and M5 pan
head screws.
Copyright 2014 FUJITSU LIMITED
M5 Centering screws (10mm)
57
P3AM-5502-05ENZ0