Snmp Trap Setup - Fujitsu Eternus DX60 S2 User Manual

Chapter 5 Setup
5.2 ETERNUS DX Disk Storage System Monitoring Setup
5
6
7
8
5.2.3

SNMP Trap Setup

SNMP Trap can be sent to the SNMP Manager (monitoring server) when an event occurs in the
ETERNUS DX Disk storage system.
The SNMP Trap setting is explained below.
IMPORTANT
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
Set the necessary items in the [Mail Server Settings] area.
After finishing the necessary settings, click the [Set] button.
A confirmation screen appears.
Click the [OK] button.
The specified send E-mail setting is registered.
Click the [Send Test E-mail] button to check that an E-mail can be sent to the
specified E-mail destination address.
Carefully read this manual and the manuals that are supplied with the
monitoring software (SNMP Manager) that is to be used before monitoring
the ETERNUS DX Disk storage system.
Copyright 2014 FUJITSU LIMITED
111
End of procedure
P3AM-5502-05ENZ0