Chapter 3 Rack Installation
3.2 Installing Controller Enclosure
■ 3.5" type controller enclosure
4
4-1
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
Use the two thumb screws at the front of the controller enclosure to fasten it to the rack.
Thumb screw
For 3.5" type controller enclosures, attach the front cover.
Fit the front cover in the left end slot of the controller enclosure to attach.
Be careful so that the part of the front cover to be fit in the slot
IMPORTANT
does not touch the power switch (
Slot
Copyright 2014 FUJITSU LIMITED
(Rear rack pillars)
55
).
P3AM-5502-05ENZ0