Chapter 3 Rack Installation
3.2 Installing Controller Enclosure
3.2
Installing Controller Enclosure
This section describes how to install the controller enclosure in a rack.
Procedure
1
■ For the EMEA&I region
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Installation-
Do Not
CAUTION
•
Do not uninstall the disks that are installed by default or move them
to any other slot.
Contact your sales representative or maintenance engineer if disks
that are installed by default need to be uninstalled or moved to
another slot.
Attach the rack rails to the rack.
(1)
Attach the 2U Bracket to the left rear rack pillar.
The M5 centering screws should be inserted in the 1st and 6th holes above the base
line of the controller enclosure.
2U Bracket
Copyright 2014 FUJITSU LIMITED
M5 Centering screws (10mm)
50
P3AM-5502-05ENZ0