Example Programming Entry - Panasonic DBS 824 Manual

4 Press the desired FF key
Notes
l
l
From a Non-Attendant Port
When programming from a display telephone other than an attendant, follow
these steps
1 Press ON/OFF
2 Dial #98
3 Enter the programming authorization code (9999 by default)
4
Press PROG
5 Press the pound sign twice (##)
6 Press the desired FF key, and proceed with programming

Example Programming Entry

If you're unfamiliar with DBS programming, use the following example to
guide you through a simple programming change
This example explains how to set the DBS time and date from an attendant
phone
1 Press [ON/OFEJ, [PROG] ( F"isdisplayed), # (
( Program Mode
Issued 3/l/95
Name settings can only be programmed from the attendant telephone or a
DSS console connected to it
When you enter the programming mode through an attendant phone, the
system will automatically change to the "Night" mode After exiting the
programming mode, the system will return to the appropriate Day/Night/
Night 2 mode according to the system clock and the mode's start time
is displayed on line 1,
DBS 824-10-400
is displayed), #
is displayed on line
"MAIN MODE
Intro-7