Auto Day Mode - Panasonic DBS 824 Manual

System Features
The digits used for the answer signal code are determined by the
l
requirements of the voice mail system
l
During transmission of the answer signal code, other DTMF digits and
l
functions from the DBS 824 extension are ignored

Auto Day Mode

(CPC-S and CPC-M)
Description
Auto Day Mode allows the DBS 824 to go into day mode automatically
The DBS 824 can also be programmed to go into night mode automatically
(see "Night Service," page l-25)
If only one of the auto modes is turned on, the DAY/NIGHTl/NIGHT2
toggle key or the DAY, NIGHT1 or NIGHT2 key is used to turn off the auto
mode For instance, if night mode has been activated automatically, the
attendant must press the DAYiNIGHTUNIGHT2 key or DAY to go into day
mode (Note You must wait at least 3 minutes delay after the automatic mode
is activated before manually changing the mode Otherwise the system will
immediately revert back to the automatic mode )
If only one of the auto modes is turned on, the DAY/NIGHTl/NIGHT2
toggle key, NIGHT1 key, or NIGHT2 key can also be used to go into an auto
mode before the scheduled time If auto day and both auto night modes are
turned on, themanual mode keys cannot be used
Related Programming
l
l
l
Considerations
l
Issue Date 3/l/95
If the called extension does not answer and is forwarded to voice mail, the
DBS 824 sends a call forward ID code back to the voice mail system
If both auto modes are set, the starting times must differ by at least one
hour
DBS 824-l O-700
Auto Day Mode
1-7