Panasonic DBS 824 Manual page 170

Hide thumbs Also See for DBS 824:

Table of Contents

System Installation Area Code

Software Version WC-S and CPC-M, Version 1 0 and higher

Address FFl 2## 1# 17# (0 or l)#

This program determines if the DBS 824 system's location requires a "1" to

be dialed before the area code to make long-distance calls This setting will

affect the way the 824 system handles Toll Restriction (TRS) and Least Cost

Routing (LCR) for long-distance calls

In almost all cases, the default setting ("1' must be dialed) should not be

Interaction With TRS and LCR

before a long-distance call), the system will look at the first three digits of the

number dialed, whether it's a "1" or not This would severely limit the

capability of TRS and LCR, which are based on 3-digit area codes

If "1" is selected ("1 ' is required before dialing a long-distance call), the

system will ignore the first dialed digit (could be "0" or "1") and look at the

next three digits dialed as the area code

Related Programming

Toll Restrictions FE'

Least Cost Routing FF8

must be dialed before a long-distance call

If "0" is selected above (,' 1" is

DBS 824-l O-400

Issued 3/l /95

Chapters

Table of Contents