System Hold - Panasonic DBS 824 Manual

Key Telephone Features
l
l
Considerations
l
l
l
l
l

System Hold

Description
Using System Hold, you can place either an outside call or an Intercom Call
on hold
A call placed on System Hold can be retrieved from any extension
Operation
To place a call on System Hold
Press the HOLD key
l
Issued 3/l /95
When using an outside line for which there is no line key on your
extension, press the HOLD key to place the call on hold, and then press a
vacant line key Release the held call by pressing HOLD again (System
programming determines whether the call will be placed on Exclusive
Trunk Hold or System Trunk Hold )
A held call will recall if it is not retrieved before the Hold Recall Timer
expires "Hold Recall #XX" (where "xx" is the outside line number)
appears on the display if a call has been held beyond the time limit
If you press the HOLD key during a conference with two outside lines,
both outside lines will be placed on hold
If your system is set for onhook transfer and you have placed an outside
call on hold, and you then make an Intercom Call, make sure the other
extension hangs up before you do If you hang up before the other
the held outside line will be transferred to that extension
extension,
(Pressing FLASH releases the extension )
The DBS 824 can provide music-on-hold to callers placed on hold See
"Music-On-Hold" (page l-24) for more information
The line LED being used for the call flashes green
DBS 824-l O-700
Call Hold
3-15