Installation - Panasonic DBS 824 Manual

Hide thumbs Also See for DBS 824:

Table of Contents

Telephones and Peripheral kquipment

Off-Premises Adaptor (OPX)

Analog phones can be connected as off-premise stations through a direct

line to the DBS or through the central office, depending on how far the

stations are from the OPX Adaptor

Maximum distances for direct connection to OPX stations

One OPX Adaptor (VB-43702) is required for each OPX station

The ringing output of the OPX Adaptor is 225 Vp-p (peak-to-peak) at 20

When OPX stations are connected through the central office, an

ringer supply may be required If required, the ringing supply is connected

to the OPX Adaptor

Installation

The following procedures describe direct OPX connection and OPX

connection through a CO Refer to Figure 5-13 when installing the OPX

Installing an OPX Station Without Going Through a Central Office

Issued 3/l 195

Table 5-3 shows how far the OPX stations can be from the adaptor

Max distance

the OPX Adaptor and the OPX

Remove the cover from the OPX Adaptor

Remove the cable punch-out plate (Figure 5-12) to make an opening for

the cables coming into the OPX Adaptor

To remove the plate, cut the grooves on either side with diagonal cutters

Then bend the plate back and forth with needle-nose pliers to remove it.

DBS 824-l O-300

Adaptor (upx)

Table of Contents