Forced Least Cost Routing I - Panasonic DBS 824 Manual

Forced Least Cost Routing
Software Version CPC-S and CPC-M, Version 1 0 and higher
Address FF3 (ExtPort)# 4# (0 or l)#
Description
Use this address to set individual extension(s) for forced Least Cost Routing
(LCR) If an extension is set for forced LCR the caller must dial 9 or press
an FF key programmed for LCR in order to initiate an outside call (The
caller will now hear a dial tone generated by the DBS 824 -- but the system
will not access an outside line until the caller dials an area code and office
code, after which the system selects the least expensive trunk )
LCR is an automatic routing feature in which the DBS 824 selects the trunk
with the least expensive carrier for outside calls LCR can be based on time
of day, the carrier assigned to the trunk, and/or the dialed number Use the
Programming
Related Programming
Least Cost Routing All FF8 programs
Issued 3/l/95
FF3 (l-16 or l-24)# 4# (0
Extension Port
CPC-S 1-16
CPC-M l-24
DBS 824-10-400
or
l=Forced LCR is on
3-7