Multi-Co (Mco) Appearances - Panasonic DBS 824 Manual

Hide thumbs Also See for DBS 824:

Table of Contents

Key Telephone Features

Multi-CO (MCO) Appearances

(CPC-S and CPC-M)

Assignments" When outside calls come in, the MC0 key flashes green If a

second outdise cal comes in the a second MC0 key flashes green If another

extensions answers an outside call, then the MC0 key will stop flashing and

becomes idle

You can make and receive CO line calls using a Multi-CO (MCO) key

An MC0 key can be assigned to any of the pooled trunk groups See "Pooled

Trunk Access" on page 3-68 for more information

See "ML/MC0 Separation" (page 3-53) for information on assigning both

ML and MC0 keys to the same system

Issued 3/l /95

Both extensions must belong to the same paging group (l-7) Paging group

0 does not allow override

Barge-in for Direct Lines cannot override a DL under the following

appear on an FF key

For example, if extension 200 wants to barge into a DL that appears on

extension 20 1, extension 200 cannot barge into the DL if 20 1 is holding a

trunk that does not appear on an FF key

DBS 824-l O-700

Line Appearances

Table of Contents