Panasonic DBS 824 Manual page 176

Third Attendant Position
Third Attendant Position
Software Version CPC-S and CPC-M, Version 1 0 and higher
Address
Description
This address assigns a DBS 824 key phone as the third attendant position
The previous and following addresses (FFl 2# l# 22# and FFl 2# l# 24#)
can be used to assign second and fourth attendant positions
When all line appearances at the first attendant are busy, calls will transfer in
sequence to the second, third, and fourth attendants If all line appearances
are busy on all attendants, calls will transfer to the Attendant Transfer
Extension (if assigned)
Programming
To assign a third attendant
To reset the third attendant position to the default value
Related Programming
Second Attendant Position FF 1 2# l# 22# (lOl-699)#
Fourth Attendant Position FFl 2# l# 24# (lOl-699)#
Attendant Transfer Extension FFl 2# l# 2% (lOl-699)#
Notes
extension must be installed at the port assigned as the third attendant before
the third attendant can be cleared Likewise, an extension cannot be
programmed as a third attendant unless it is physically assigned
Page l-28
Extension Number (10 l-699)
third attendant assigned)
An
Issued 3/l/95