Speed Dial Mode - Panasonic DBS 824 Manual

Speed Dial Mode

Speed Dial Mode
Software Version CPC-S and CPC-M, Version 1 0 and higher
Address FFl 2# l# 33# (0 or l)#
Description
This program determines the mode for speed-dialing (both Personal and
System) This speed-dial mode setting affects the
numbers that can be created,
numbers, as shown in the following table
Table l-4 Speed-dial number ranges in Standard and Add-On modes
CPC-s:
SSD Number Range
PSD Number Range
CPC-M:
SSD Number Range
PSD Number Range
Programming
Related Programming
System Speed Dial Numbers FFlO l#
Personal Speed Dial Numbers FFlO 2#
Notes
the Add-On mode setting is disabled
Changing Speed-Dial Modes
mode, or vice versa, the system should be powered-off then back on to enable
the new mode setting The speed-dial number ranges will also change as a
result of the mode change, see Chapter 10,
for more information about these changes
Page l-38
as
well as the
- -
Standard Mode
00-89
Standard Mode Add-On Mode
00-89
CPC-S model supports only Standard mode,
If changing from Standard mode to Add-On
DBS 824-l O-400
range
of speed-dial
number of digits in
the speed-dial
Add-On Mode
000-199
900-939
l=Add-On Mode
NOTE Default is 0 for CPC-S,
default is 1 for CPC-M
Speed Dial Programming (FFIU)
Issued 3/l /95