Panasonic DBS 824 Manual page 611

Call Transfer
Related Programming
l
. FFl (System) Extension Transfer Recall Timer for CO Calls
l
l
l
Considerations
l
l
l
l
l
l
l
3-22
"Transf XXX #YY" (where "XXX" is the extension and "YY" is the
l
line) appear on the display
The third party need only pick up the handset to speak to the outside
l
line
For users to transfer calls by pressing HOLD, dialing the extension, and
going onhook, the Onhook Transfer feature must be enabled in system
programming
If Onhook Transfer is disabled, blind transfer is performed by pressing
HOLD, dialing the extension number, pressing PROG, and then going
If Onhook Transfer is enabled, users can transfer calls by pressing PROG
before going onhook
The Attendant can transfer calls while the handset is still in place, even if
the system is not set for Onhook Transfer
You cannot transfer a call to an extension that has Do Not Disturb or
Absence Message activated
You can transfer a call to an extension that has Call Forwarding activated
The transferred call will follow the call forwarding path of the extension it
is transferred to
For example, if extension "A" is forwarded to extension "B," calls that are
transferred to extension "A" will be forwarded to extension "B "
When you transfer a call to an extension that is busy or does not answer
and does not have Call Forwarding activated, the transfer will recall to
your extension after the Transfer Recall Timer expires The other
extension's number and the number of the transferred CO line or extension
will appear on your display
DBS 824-l O-700
Key Telephone Features
Issued 3/l /95