Panasonic DBS 824 Manual page 203

To reset an automatic pause to default
Examples
Inserting a pause after the PBX access code "9X"
To insert a pause after the PBX access code "9X' is dialed, enter this address
This sequence will insert a pause between the "9X" and the rest of the dialed
digits For example,
Inserting a pause after the PBX access code "8"
To insert a pause after the PBX access code "8" is dialed, enter this address
This sequence will insert a pause between the "8" and the rest of the dialed
digits For example,
Related Programming
Automatic Pause Timer FFl 3# lO#
Automatic Pause for PBX Line
Issued 3/l /95
Automatic Pause Position For PBX Access Codes
First Digit of PBX Access Code
(see table, previous page)
8 + PAUSE + 404-555-5793
DBS 824-l O-400
CONF ON/OFF
FF2 (Trunk)# 13#
Page l-55