Panasonic DBS 824 Manual page 681

Hide thumbs Also See for DBS 824:

Table of Contents

DSLT Features

(CPC-S and CPC-M)

The HOLD key provides either exclusive or system hold, depending on

system programming With Exclusive Hold, only the extension that held the

call can retrieve it With System Hold, another extension can retrieve the call

To place a call on Hold

Voice calls do not forward when Call Forwarding--No Answer is used

To forward to an external number, the number must first be pre-

programmed in personal or system speed dialing Forwarding to an outside

number requires the use of pooled trunks (9, 8 l-86) However, dial "9"

trunk access is not available for use when Least Cost Routing is active

Extensions for which Call Forwarding to an external number has been set

Calls can be forwarded to a third-party voice mail by using the "Call

Forward ID Code" described on page l- 12

For an extension to be permanently call forwarded to the pilot number of a

hunt group, the hunt group pilot number must be 24.4 or above For

example, if extension 200 is assigned as the pilot number of a hunt group,

hunting will work properly when 200 is dialed However, permanent call

forwarding will not work for any extension that is permanently call

forwarded to the hunt group pilot number

Chapters

Table of Contents