Intercept Routing - Panasonic KX-TAW848 Features Manual

1.1 Incoming Call Features
In this example:
If the caller's telephone number is "1-212-555-1234":
1)
2)
Conditions
• If Automatic Caller ID Modification is used:
Store the modified number in the System Speed Dialing Table.
Feature Guide References
1.1.1.2 Direct In Line (DIL)
1.6.1.4 Speed Dialing—Personal/System
1.16.1 Caller ID
1.1.1.4

Intercept Routing

Description
Redirects an incoming CO line call to a preprogrammed destination when the original
destination does not, or can not, answer the call. There are four types of Intercept Routing,
described below.
No Answer (IRNA)
Busy
DND
No Destination
Intercept Routing redirects calls to destinations based on the original destination of the call, as
shown in the table below. Different intercept destinations can be programmed for each time
mode. Note that calls redirected by Intercept Routing—No Answer/Busy/DND are directed to
the same destination, and that the intercept destination for Intercept Routing—No Destination
is always an operator.
When the original destination is:
• Wired Extension (PT/SLT)
• PS
16 Feature Guide
The PBX looks for the number in the System Speed Dialing Table. (The CO Line
Access number, "9", is disregarded.) The number is found in location 000.
If CLI distribution is enabled in the current time mode for the CO line carrying the call
(for DIL distribution), the call is routed to its CLI destination, extension 200.
Type
If a called party does not answer a call within a preprogrammed
time period (
preprogrammed intercept destination.
If a called party is already handling a call, new calls are
redirected to a preprogrammed intercept destination.
If a called party is in Do Not Disturb (DND) mode, the call is
redirected to a preprogrammed intercept destination.
If a call has no destination (i.e., if a destination is not assigned),
the call is redirected to an operator. (
Routing—No Destination)
Description
Intercept Time [203]), the call is redirected to a
The Available Intercept Destination is:
The destination assigned to the original extension
( Extension Intercept Destination [604])
1.1.1.5 Intercept