Panasonic KX-TAW848 Features Manual page 202

3.2 PC Programming
Starting KX-TAW848 Maintenance Console
Note
The screenshots shown here are for reference only, and may differ from the screens
displayed on your PC.
202 Feature Guide
1. Connect the PC to the PBX with a USB cable.
2. Start KX-TAW848 Maintenance Console
from the Start menu.
3. Enter a valid programmer code (INSTALLER,
ADMIN, or USER), then click [OK].
Note
When starting KX-TAW848 Maintenance
Console for the first time (i.e., either
when the PBX is still set to the factory
default settings, or after initializing the
PBX), Quick Setup can be launched
automatically by entering the Installer
Level Programmer Code and password.
( 2.3.3 Quick Setup)
4. Click "Connect"
Note
To connect to the PBX via USB, the KX-
TDA USB driver must be installed on the
PC, as explained above in "Installing KX-
TAW848 Maintenance Console".
5. Enter the password appropriate to the
programmer code entered in Step 3 and click
[OK].
Note
The password for each programmer
code is 1234 by default. (
Programming)
"USB" from the menu bar.
2.3.1 PC