Direct In Line (Dil) - Panasonic KX-TAW848 Features Manual

1.1 Incoming Call Features
1.1.1.2

Direct In Line (DIL)

Description
Directs an incoming CO line call to a preprogrammed destination based on the CO line carrying
the call. Each CO line has a destination for each time mode.
[Method Flowchart]
The call is routed to its
CLI destination.
[Programming Example: DIL Table]
The table can be programmed for each CO line.
Port No.
(CO Line No.)
01
02
* DIL 1:1 Destination [450]
In this example:
If a CO line call is received on CO line 01:
In day mode: Calling Line Identification (CLI) distribution is enabled. The call is routed to its CLI
14 Feature Guide
A CO line call is received.
Does the call have
Caller ID information and is CLI
distribution enabled for the CO line in
the current time mode?
Yes
been stored in the System Speed
Dialing Table and has a CLI destination
Is a DIL destination assigned
for the current time mode?
The call is routed to the
DIL destination.
CLI Distribution
Day Lunch Break
Enable Disable Enable
Enable Disable Disable
Yes
Has the caller
been assigned?
No
Yes
Night Day
Disable 101
Disable 102
No
No
The call is routed to an
operator (Intercept
Routing—No Destination).
DIL Destination
*
Lunch Break Night
100 101 100
100 102 100