Speed Dialing & Caller Id-Caller Id Modification [6-1-2] - Panasonic KX-TAW848 Features Manual

Default
Value Range
Feature Guide References
Feature References
•
•
Programming References
•
4.6.2 Speed Dialing & Caller ID—Caller ID Modification [6-1-
2]
The telephone numbers of incoming callers can be modified automatically by a Caller ID
Modification Table, and then recorded for calling back.
The PBX looks for incoming telephone numbers that begin with an area code programmed in
the Caller ID Modification Table assigned to that CO line group. If it finds such a code, it
removes digits and adds a number to the telephone number. If this modified telephone number
is stored as a System Speed Dialing number, the caller's name can be shown on a PT display
and the call can be routed to a certain extension (CLI destination). A maximum of 4 Caller ID
Modification Tables, each containing 10 local/international call data and 1 long distance code,
can be programmed. Each CO line group can select a table for use. Select the desired table
from the Modification Table list.
If the telephone number does not contain an area code programmed here, it is modified based
on the Long Distance Code settings.
Area Code (for Local / International Call Data 1–10)
Specifies the leading number (area code) to look for in the incoming caller's number.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
Removed Number of Digits
Specifies the number of digits to be removed from the beginning of the incoming caller's
number.
Default
Value Range
Not stored.
Max. 4 digits (consisting of 0–9)
1.1.1.3 Calling Line Identification (CLI) Distribution
1.16.1 Caller ID
4.9.2 DIL Table & Port Setting [9-2]—CLI for DIL—CLI Ring for DIL—Day, Lunch,
Break, Night
Not stored.
Max. 6 digits (consisting of 0–9, *, and #)
1.16.1 Caller ID
None
Local / International Call Data 1–10: 3
Long Distance Code: 0
0–9
4.6 Feature [6]
Feature Guide 437