Pt Programming - Panasonic KX-TAW848 Features Manual

2.3 System Data Control
programming (Default: None [no limitation]), access will be locked and can only be
unlocked by enabling remote access once again through on-site system programming (
Remote Programming [810]).
Programmer Code
Installer Level
Programmer Code
Administrator Level
Programmer Code
User Level
Programmer Code
• Remote Programming Limitation
It is possible to disable remote access through system programming (
Programming [810]). Disabling this feature will also disable the ability to perform on-site
programming via modem.
• If an extension user sets Walking Extension at the same time that the extension's data is
being programmed through PC programming, the data may not be transferred properly.
( 1.22.3 Walking Extension)
Installation Manual References
Installation Manual
2.5.5 RMT Card
3.1 Overview
3.2 Connection
3.3 Installation of the PC Programming Software
Feature Guide References
1.1.1.2 Direct In Line (DIL)
3.2 PC Programming
2.3.2

PT Programming

Description
A proprietary telephone (PT) can be used to customize the settings of the PBX or of an
extension, using the following programming features:
Programming
Type
Personal
Programming
186 Feature Guide
Password
System Password
for Installer
System Password
for Administrator—
for PC Programming
System Password
for User—for PC
Programming
Description
Used by an extension user to
customize the extension's
settings.
Authorized Programming
All settings can be programmed.
Authorized programming is limited to
extension settings, PBX operator
assignments, and System Speed Dialing
entries.
An extension user can add or modify
entries to the System Speed Dialing
Table.
Example
PT Display Language,
Call Waiting Tone, etc.
Remote
Authorized
Programmer
Extension user