Panasonic KX-TAW848 Features Manual page 156

1.21 Administrative Information Output Features
The following data can be controlled through system programming to adjust whether (or
how) they are printed or displayed by SMDR.
[Programmable Items]
Outgoing CO line
call
Incoming CO line
call
Outgoing intercom
call
Log-in/Log-out
status
ARS dial
Caller's
identification
Secret dialing
Date order
Received call
Answered call
Conditions
• SMDR Format
The following SMDR format parameters can be set through system programming in order
to match the paper size being used by the printer:
a)
b)
The page length should be at least four lines longer than the skip perforation length.
156 Feature Guide
Item
Page Length: determines the number of lines per page (
[802]).
Skip Perforation: determines the number of lines to be skipped at the end of every
page ( SMDR Skip Perforation [803]).
Controls whether outgoing CO line calls are shown. This
setting is common throughout the PBX (
Call Printing [804]). Class of Service (COS) programming is
also required.
Controls whether incoming CO line calls are shown (
Incoming Call Printing [805]).
Controls whether outgoing intercom calls are logged.
Controls whether the Log-in/Log-out status of extensions is
logged.
Controls whether the user-dialed number or the ARS-modified
number is shown.
A Host PBX Access code ("=" followed by the access code)
can be shown (as supplementary information) only when the
modified number is selected in this setting. (
Route Selection (ARS))
Controls whether a caller's telephone number, name, number
and name, or nothing is shown. If "none" is selected, <I> will
not be shown.
Controls the display of secret dialing, when ARS dial, above, is
set to show ARS-modified numbers. If enabled, numbers
dialed secretly will be shown as dots.
If ARS dial is set to show user-dialed numbers, secretly dialed
numbers are always shown as dots in SMDR, regardless of
this setting.
Controls the date format. (MM-DD-YY, DD-MM-YY, YY-MM-
DD, or YY-DD-MM)
Controls whether the time of receiving an incoming CO line call
is shown.
Controls whether the time of answering an incoming CO line
call is shown.
Description
SMDR Outgoing
1.9.1 Automatic
SMDR Page Length
SMDR