4.4 Extension [4]
to the character code table described in section 3.2.1 Installing and Starting KX-TAW848
Maintenance Console.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
Option 4
Slot
Indicates the slot position of each extension card (reference only).
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
Port
Indicates the port number (reference only).
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.
2.
When changing the extension number, make sure that the extension port is not in use. If the
extension number is changed while the port is in use, the new extension number will not come
into effect.
370
Feature Guide
Not stored.
Max. 16 characters
1.17.2 Absent Message
None
Current slot number
Slot number
None
4.1.1 Slot [1-1]
Current port number
Port number
None
4.1.11 Extension Port [1-5]
Type the new extension number, then click Apply.
Set the status of the extension port to "OUS", then "INS".