4.5 Optional Device [5]
Cyclic Tone Option—Tone Off Maximum Time
Specifies the maximum time the PBX waits for a cyclic tone to be sent from the telephone
company before recognizing it as a tone-off. When no tone is detected within the time set here,
the PBX recognizes it as a tone-off.
To change Cyclic Tone Option, follow the steps below:
1.
2.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
Repeating Times of On / Off for Detection
Specifies the number of times the tone pattern (a set of tone-on and tone-off) must be received
to establish reception of the cyclic tone. This determines the end of call.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
4.5.4
DISA—Message Setting [5-3-2]
Outgoing messages (OGM) for DISA calls can be specified. A maximum of 32 OGMs can be
programmed.
Floating Extension Number
Specifies the floating extension number of the OGM.
Default
Value Range
Feature Guide References
Feature References
•
•
Programming References
•
434
Feature Guide
Change Cyclic Tone Option.
Set the status of the MSG2 card to "OUS", then "INS".
600 ms
100 + 10 x n (n=1–390) ms
1.15.6 Direct Inward System Access (DISA)
4.1.1 Slot [1-1]
3
3–16
1.15.6 Direct Inward System Access (DISA)
None
Starting at 501
Max. 4 digits (consisting of 0–9)
1.15.5 Outgoing Message (OGM)
1.15.6 Direct Inward System Access (DISA)
None