Leading Number Exception [8-6] - Panasonic KX-TAW848 Features Manual

Programming References
•
Authorization Code for TRG
Specifies an Authorization code for each CO line group. The Authorization codes can be added
to the user-dialed number by specifying "G" command in Modify Command on the Carrier
tab.
Authorization Code for Trunk Group—TRG 01–TRG 64
Specifies the Authorization code of each carrier for each CO line group.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
4.8.6

Leading Number Exception [8-6]

Specifies telephone numbers that will not be connected using the ARS feature. When the user-
dialed number includes a leading number exception, the PBX sends the number to a CO line
by the Idle Line Access method if ARS Mode in System Setting [8-1] is "on". A maximum of
200 different leading number exceptions can be programmed.
Leading Number Exception
Specifies the leading number exception.
Default
Value Range
Note
"X" can be used as a wild card character which substitutes any digit in its position.
Feature Guide References
Feature References
•
Programming References
•
None
Not stored.
Max. 10 digits (consisting of 0–9, *, and #)
1.9.1 Automatic Route Selection (ARS)
None
Not stored.
Max. 16 digits (consisting of 0–9, *, #, and X)
1.9.1 Automatic Route Selection (ARS)
None
4.8 ARS [8]
Feature Guide 451