Quick Setup - Panasonic KX-TAW848 Features Manual

2.3 System Data Control
Feature Guide References
2.2.6 Manager Features
3.3 PT Programming
User Manual References
User Manual
3.1 Personal Programming
3.2 Manager Programming
3.3 System Programming
2.3.3

Quick Setup

Description
Basic PBX parameters can be programmed the first time the PBX is accessed with a PC using
the KX-TAW848 Maintenance Console software.
When the PBX is accessed with the Installer Level Programmer Code and default password
( 2.3.1 PC Programming), for the first time (i.e., accessed after the PBX's settings have been
initialized or when the PBX's settings are still set to their default values), Quick Setup will
launch automatically. From here the following basic parameters can be programmed as
desired:
Item
Date & Time
Set
System
Password for
Installer
Operator &
Manager
Flexible
Numbering
Type
188 Feature Guide
Parameter
Year/Month/Date/ The date and time set on the PC can be used by default.
Hour/Minute
4–10 characters Select the password that will be required to access the
PBX using the Installer Level Programmer Code.
Extension Assign a PBX operator. (
Number This extension will be the operator for all time modes,
and is automatically assigned manager status to
perform manager operations. (
Features)
1. Pattern 1
Select whether or not the prefix " " must be entered
(with ) before dialing feature numbers.
2. Pattern 2 [Example] Call Pickup feature number
(without ) Pattern 1 (with
Pattern 2 (without
Note that certain feature numbers (Line Access
numbers, Operator Call, etc.) never need this prefix.
For a list of the default flexible numbers, refer to the
[Flexible Numbering Table (available while a dial tone is
heard)] (
Numbering).
Description
2.2.5 Operator Features)
): 41
): 41
2.3.5 Flexible Numbering/Fixed
2.2.6 Manager