Panasonic KX-TAW848 Features Manual page 256

4.1 Configuration [1]
Feature Guide References
Feature References
•
Programming References
•
Extension Number
Specifies the extension number of the port.
To change the extension number of a wired extension, follow the steps below:
1.
2.
When changing the extension number, make sure that the extension port is not in use. If the
extension number is changed while the port is in use, the new extension number will not come
into effect.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
Extension Name
Specifies the extension name of the port. As for the available characters, refer to the character
code table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance
Console.
Default
Value Range
Feature Guide References
•
PT Property—Type (for APT or Hybrid port)
Selects the port type.
To change the port type of an extension port, follow the steps below:
1.
2.
3.
Default
256 Feature Guide
None
4.1.12 Extension Port [1-5] Port Command
Type the new extension number, then click Apply.
Set the status of the extension port to "OUS", then "INS".
Starting at 101 (For port 01 of the first extension card that is
installed. Extension numbers are preset for subsequent extensions
by adding one to the previous extension number.)
Max. 4 digits (consisting of 0–9)
None
4.1.12 Extension Port [1-5] Port Command
Not stored.
Max. 20 characters
None
Set the status of the extension port to "OUS".
Change the port type of the extension port, then click Apply.
Set the status of the extension port to "INS".
Normal