Panasonic KX-TAW848 Features Manual page 187

Programming
Type
System
Programming
Manager
Programming
Conditions
• Class of Service (COS) programming determines the level of programming an extension
user is authorized to perform (
– System programming and personal programming
– Personal programming only
– No programming may be performed
• The extension which is connected to the lowest numbered port on the card installed in the
lowest numbered slot can perform both personal programming and system programming
regardless of the extension's COS.
• COS programming determines which extensions are manager extensions and can
therefore perform manager programming.
• During programming, the PT is considered to be busy and will not receive calls.
• Only one system programming (including PC programming) or manager programming
session is permitted at a time, i.e., these two programming features cannot be performed
simultaneously by two users.
• The PBX will allow 16 simultaneous personal programming sessions, or one system or
manager programming session and 15 personal programming sessions.
• System Programming Password Level
To access system programming, a valid password must be entered. There are two types
of passwords; they are set at the factory but can be changed through system
programming.
Password Type
System Password for
Administrator—for
PT Programming
System Password for
User—for PT
Programming
• Personal Programming Data Reset
A PT user can return settings made through personal programming (Preferred Line
Assignment, Live Call Screening Mode, etc.) to their default settings all at once.
Description
Used by an authorized party to
customize the PBX.
Used by an extension assigned
as a manager to customize the
current state of an extension, or
to grant special privileges
temporarily to an extension user.
Programming Mode Limitation [516]):
Authorized Programming
All system programming that is
available through PT programming.
System programming that has been
made accessible to PT users through
PC programming.
2.3 System Data Control
Example
Intercept Destination,
ARS Mode, Date and
Time, etc.
Switching the current
time mode, Remote
Extension Lock,
Remote PIN Clear, etc.
• System Password for
Administrator—for PT
Programming [110]
• System Password for
User—for PT
Programming [111]
Authorized
Programmer
Authorized
administrator or
extension user
Extension
assigned as a
manager
Password
Assignment
Feature Guide 187