4.2 System [2]
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
•
Forced CO Line Disconnect Timer for Hold Recall
Specifies the length of time until a held CO line call is disconnected after the holding extension
receives the Hold Recall.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
Hot Line (Pickup Dial) Start Timer
Specifies the length of time until automatic dialing starts after going off-hook.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
Extension First Digit Timer
Specifies the length of time within which the first digit of a feature number (e.g., extension
number) must be dialed before reorder tone is heard.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
264
Feature Guide
60 s
1–240 s
1.12.2 Call Park
4.4.1 Wired Extension—Extension Settings [4-1-1]
4.4.7 Portable Station—Extension Settings [4-2-1]
30 min
1–30 min
1.12.1 Call Hold
None
1 s
0–15 s
1.6.1.6 Hot Line
None
10 s
0–15 s
1.5.2 Automatic Extension Release
None