Call Waiting - Panasonic KX-TAW848 Features Manual

1.1 Incoming Call Features
preferred ring tone pattern by selecting a table.
[Ring Tone Patterns]
Single
Double
Triple
S-Double
[Programming Example: Ring Tone Pattern Table]
Intercom
Table
Call/Hold
No.
Recall
1 Double
2 Single Double
1.1.3.3

Call Waiting

Description
A busy extension user can be alerted to a new call by a tone heard through the handset or built-
in speaker. The busy extension user can then answer the second call either by disconnecting
the current call or placing it on hold.
Call Waiting can be enabled or disabled for intercom calls and CO line calls separately.
Note that doorphone calls and CO line calls transferred from another extension or received via
an incoming call distribution group are treated as CO line calls.
This feature is also known as Busy Station Signaling (BSS).
Conditions
• An extension in a VM group (DPT/DTMF) cannot receive a call waiting tone. This is to
prevent call waiting tones from interrupting the recording of voice mail messages.
• Data Line Security
When an extension user activates Data Line Security, Call Waiting is turned off. (
Data Line Security)
• Call Waiting Tone
A proprietary telephone (PT) user can select the preferred call waiting tone through
personal programming (Call Waiting Tone Type Selection).
• Caller Information
When an extension receives a call waiting tone, the caller's information will flash on the
22 Feature Guide
1 280 ms
CO Line Call/Hold
Recall
TRG1 TRG2 TRG...
Single
Doorphone Call
Port 1 Port 2 Port...
Single
Double
Timed Call LCS
Reminder Back
1.10.4