Panasonic KX-TAW848 Features Manual page 352

4.3 Groups [3]
VM DTMF Status Signal—Confirm
Specifies the DTMF status signal the PBX sends to the VPS when a certain feature (e.g.,
Message Waiting) has been successfully set or canceled on an extension.
Default
Value Range
Feature Guide References
Feature References
•
•
Programming References
•
VM DTMF Status Signal—Disconnect
Specifies the DTMF status signal the PBX sends to the VPS when the caller hangs up.
Default
Value Range
Feature Guide References
Feature References
•
•
Programming References
•
VM DTMF Status Signal—FWD to VM Ringback Tone
Specifies the DTMF status signal the PBX sends to the VPS when the call has been forwarded
to the VPS and the PBX is calling another port of the VPS.
Default
Value Range
Feature Guide References
Feature References
•
•
Programming References
•
VM DTMF Status Signal—FWD to VM Busy Tone
Specifies the DTMF status signal the PBX sends to the VPS when the call has been forwarded
to the VPS and all ports of the VPS are busy.
Default
Value Range
352 Feature Guide
9
Max. 4 digits (consisting of 0–9, *, and #)
1.19.1 Voice Mail (VM) Group
1.19.3 Voice Mail DTMF Integration
None
#9
Max. 4 digits (consisting of 0–9, *, and #)
1.19.1 Voice Mail (VM) Group
1.19.3 Voice Mail DTMF Integration
None
6
Max. 4 digits (consisting of 0–9, *, and #)
1.19.1 Voice Mail (VM) Group
1.19.3 Voice Mail DTMF Integration
None
7
Max. 4 digits (consisting of 0–9, *, and #)