Panasonic KX-TAW848 Features Manual page 155

Number in
the Data
Pattern
(5) Dial Number
(6) Ring
(7) Duration
(8) Acc Code
(Account
Code)
(9) CD
(Condition
Code)
(10) Cost
1.21 Administrative Information Output Features
[CO Line Call]
Outgoing CO Line Call
Shows the dialed telephone number.
Digits shown are as follows:
0 through 9, , #
P: Pause
F: External Feature Access (EFA) signal
=: Host PBX Access code (
Code (Access Code to the Telephone Company from a
Host PBX))
. (dot): Secret dialing
–: Transferred call
If the transfer destination extension enters additional
digits, those digits will be added after "–".
Incoming CO Line Call
Shows <I> + the caller's identification name/number.
[Outgoing Intercom Call]
Shows the dialed extension number followed by "EXT".
[Log-in/Log-out]
Shows the Log-in or Log-out status.
Shows the ring duration before the call was answered in
minutes/seconds.
Shows the duration of the CO line call in hours/minutes/
seconds.
Shows the account code appended to the call. (
Account Code Entry)
Shows other call information using the following codes:
TR: Transfer
FW: Call Forwarding (FWD) to CO line
D0: Call using Direct Inward System Access (DISA)
RM: Remote maintenance (modem) (
Programming)
NA: Not answered call
RC: Received call
AN: Answered call
VR: Received call with Call Waiting Caller ID (Visual
Caller ID)
VA: Answered call with Call Waiting Caller ID (Visual
Caller ID)
Shows the call charge. This is not available if your
telephone company does not provide a call charge
reporting service.
Description
1.5.4.6 Host PBX Access
2.3.1 PC
Feature Guide
1.5.4.3
155