Panasonic KX-TAW848 Features Manual page 206

3.3 PT Programming
Entering System Programming Mode
Using a PT to perform system programming allows an authorized extension user to set a wide
range of PBX features and parameters.
There are two levels of system programming that can be performed with a PT—administrator
level programming and user level programming.
Administrator Level: All system programming that can be performed with a PT is accessible.
PROGRAM/
PAUSE
User Level: System programming that has been made accessible to PT users through PC
programming can be performed.
PROGRAM/
PAUSE
Note
is used throughout these pages to indicate the default value for the given setting.
Programming Structure
Programming
Number
[0XX]
[1XX]
[2XX]
[3XX]
[4XX]
[5XX]
[6XX]
[7XX]
[8XX]
[9XX]
206 Feature Guide
System Password for Administrator
#
—for PT Programming
System Password for User
—for PT Programming
Programming Group Title
Basic Programming
System Programming
Time Programming
TRS/ARS Programming
CO Line Programming
COS Programming
Extension Programming
Resource/Interface
Programming
SMDR & Maintenance
Programming
Card Programming
= 1234
= 1234
Description
Frequently used programming steps
Global system parameters
Flexible system timers
Toll Restriction (TRS) and Automatic Route
Selection (ARS) parameters
CO line and CO line group settings
COS parameters
Assignment of extension features
Assignment of various interfaces of the
PBX
Setting of Station Message Detail
Recording (SMDR) and maintenance
features
Used to display the cards currently
installed in the PBX, or to "delete" a card
from system programming before
physically removing it.
Programming No.
3 digits
Programming No.
3 digits