System Data Control; Pc Programming - Panasonic KX-TAW848 Features Manual

2.3 System Data Control

2.3 System Data Control
2.3.1

PC Programming

Description
Although many PBX features can be programmed using a proprietary telephone (PT) (
PT Programming), a PC connected to the PBX can use the KX-TAW848 Maintenance Console
software to program in further detail. System programming, diagnosis, and data upload/
download can be performed either through on-site programming or remote programming.
1)
2)
1.
Connection Methods for On-site Programming
Serial Interface
(RS-232C port)
USB
Modem
(connected to
SLT port)*
* Remote access must be enabled through system programming (
Programming [810]) when performing on-site programming via modem.
184 Feature Guide
On-site Programming: Programming that is performed using an on-site PC
connected directly to the PBX.
Remote Programming: Programming that is performed using an off-site PC that
connects to the PBX via a CO line.
Method
The PC is connected to the PBX via the Serial
Interface (RS-232C port) of the PBX.
The PC is connected to the PBX via the USB port.
The PC is connected to a modem, which is then
connected to an SLT port of the PBX. Use the modem
to dial the floating extension number assigned to the
analog remote maintenance feature (
Floating Extension Number [811]) to access the PBX.
Description
Modem
2.3.2
Required
Hardware
—
—
RMT card and
user-supplied
modem
Remote