Panasonic KX-TAW848 Features Manual page 116

1.16 Caller ID Features
[Programming Example: System Speed Dialing Table]
(System Speed
*1
*2
4.
Displaying the Caller's Name
In addition to the System Speed Dialing Table, each extension can store names and
numbers in Personal Speed Dialing. Therefore, it is entirely possible for the same
telephone number to be stored under a different name in different locations within the
PBX.
When a call containing Caller ID information is received, the PBX will search for the caller's
name in the following order, then show that name on the display and log it via SMDR.
If a caller's name is not stored in the PBX or sent from the telephone company, it will not
be displayed or logged.
Conditions
[General]
• Caller ID signaling type can be selected through system programming (
Type [490]).
[Caller ID to SLT Port]
• Hardware Requirement: An EXT-CID card.
• Up to 8 SLTs can be programmed to receive Caller ID information through system
programming.
• When the caller's telephone number is sent to an SLT, a CO Line Access number can be
automatically added to the telephone number through system programming.
• If the caller's telephone number exceeds 16 digits, the SLT receives only the first 16 digits,
not counting the preceding CO Line Access number (if it is programmed to be added).
• If a call is transferred to an SLT, the transferring extension's information will be shown on
the SLT. If the transferring extension goes on-hook, the original caller's information will be
shown.
• When Caller ID information such as "Private", "Out of Area", or "Long Distance" is
received, this information will be shown instead of the caller's number and name.
• Depending on the type of SLT being used, caller names may not be able to be displayed.
• Incoming Call Log information is not shown on the SLT.
116 Feature Guide
Location
System Speed
Dialing Name
Dialing No.)
000 ABC Company
001 XYZ Company
System Speed Dialing Name [002]
System Speed Dialing Number [001]
1)
Personal Speed Dialing data of the extension which received the call
2)
System Speed Dialing Table
3)
The Caller ID information received from the telephone company
Telephone No.
*2
*1
912125551234
913135551234
CLI Destination
200
300
Caller ID Signal