Incoming Call Distribution Group-Group Settings [3-5-1] - Panasonic KX-TAW848 Features Manual

Feature Guide References
Feature References
•
•
Programming References
•
•
4.3.6 Incoming Call Distribution Group—Group Settings [3-
5-1]
Extensions can be assigned as members of an incoming call distribution group. Calls to an
incoming call distribution group are distributed to its member extensions as programmed. A
maximum of 64 incoming call distribution groups can be programmed.
Main
Floating Extension Number
Specifies the floating extension number of the incoming call distribution group.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
Group Name
Specifies the name of the incoming call distribution group. As for the available characters, refer
to the character code table described in section 3.2.1 Installing and Starting KX-TAW848
Maintenance Console.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
Distribution Method
Selects the call distribution method for idle extensions of the incoming call distribution group.
1.14.1 Paging
2.2.2 Group
4.4.1 Wired Extension—Extension Settings [4-1-1]
4.4.7 Portable Station—Extension Settings [4-2-1]
Starting at 601
Max. 4 digits (consisting of 0–9)
1.2.2.1 Incoming Call Distribution (ICD) Group Features—OVERVIEW
None
Not stored.
Max. 20 characters
1.2.2.1 Incoming Call Distribution (ICD) Group Features—OVERVIEW
None
4.3 Groups [3]
Feature Guide 335