Manager Features - Panasonic KX-TAW848 Features Manual

Type
Tenant operator
Operator Call
An extension user can call an operator by dialing the preprogrammed Operator Call feature
number, often simply, "0". When an Operator Call is made, the call is directed to the tenant
operator of the calling extension's tenant. If no tenant operator is assigned, the call is routed to
the PBX operator. The tenant number of the calling extension determines the current time
mode which is then used to determine the current PBX operator.
If neither a tenant operator nor a PBX operator is assigned, the caller will hear a reorder tone.
Conditions
• An extension or ICD group can be assigned as both a tenant operator and the PBX
operator.
• The same tenant operator can be assigned as the operator for multiple tenants.
Feature Guide References
2.2.3 Tenant Service
User Manual References
User Manual
1.2.1 Basic Calling
2.2.6

Manager Features

Description
An extension assigned as a manager (manager extension) is allowed to use certain features
which most extensions cannot. Class of Service (COS) programming determines which
extensions are manager extensions (
following manager features:
Each tenant can be assigned an operator. This operator is the
same for all time modes and can be either an extension or an ICD
group. A tenant's operator does not need to be an extension
assigned to the tenant it serves.
Manager Assignment [511]) and can therefore use the
2.2 System Configuration—Software
Description
Feature Guide 181