Panasonic KX-TAW848 Features Manual page 374

4.4 Extension [4]
Programming References
•
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.
2.
When changing the extension number, make sure that the extension port is not in use. If the
extension number is changed while the port is in use, the new extension number will not come
into effect.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
Extension Name
Specifies the name of the extension. As for the available characters, refer to the character code
table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console.
Default
Value Range
Feature Guide References
•
Incoming Call Display
Selects which caller information is shown on the first line of the extension's display.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
Automatic LCD Switch when start talking
Enables the first line of the display to show the call duration automatically after answering a CO
line call.
374 Feature Guide
4.1.11 Extension Port [1-5]
Type the new extension number, then click Apply.
Set the status of the extension port to "OUS", then "INS".
Starting at 101 (For port 01 of the first extension card that is
installed. Extension numbers are preset for subsequent extensions
by adding one to the previous extension number.)
Max. 4 digits (consisting of 0–9)
None
4.1.12 Extension Port [1-5] Port Command
Not stored.
Max. 20 characters
None
Caller ID Name
Caller ID Name, CO Line Name
1.18.4 Display Information
None