Management Features; Server Management - NEC express5800 A2010b User Manual

Hide thumbs Also See for express5800 A2010b:
Table of Contents

Advertisement

Chapter 1 General Description
4.3

Management Features

The server provides various features to secure the high reliability.
System failure can be prevented or recovered in a short period of time by the linkage between features
provided by the hardware itself such as redundancy of each resource as well as RAID system and monitoring
features provided by software such as NEC ESMPRO attached to the server.
Reliability can be further improved by using various optional products such as uninterruptible power supply unit
used for preventing the server from power failure and backup device to prevent unexpected data loss.
These features are realized by hardware and software shown below.
Management area

Server management

Storage management
Disk management
Backup management
Power management
Network management
Remote management
4.3.1 Server Management
System monitoring chip is installed as standard on the system board of the server. This system monitoring chip
monitors the following resources embedded in the server. These hardware features and software for the server
management such as NEC ESMPRO Manager/NEC ESMPRO Agent link each other to monitor the server
operation status, etc. In case of failure, these features report the failure to the administrator immediately.
The table on the next page shows the availability of features on the server.
Remote operation and maintenance can be performed from the management PC when the operating system is
not running. The server can be powered on by the remote power-on feature.
Tips
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
Required hardware
Basic features of server
RAID Controller
DAT/LTO, and others
Uninterruptible power supply (UPS)
Network cards
Embedded EXPRESSSCOPE
Engine SP3
NEC ESMPRO Manager and NEC ESMPRO Agent are provided with the server as
standard. Refer to descriptions of each software for the installation procedure or usage.
4. Introducing the Server
Required software
NEC ESMPRO Manager
NEC ESMPRO Agent
NEC ESMPRO Manager
NEC ESMPRO Agent
Universal RAID Utility
ARCserve , BackupExec , NetBackup, NetVault,
NetWorker
ESMPRO/AutomaticRunningController
ESMPRO/AC Enterprise
ESMPRO/AC Enterprise Multi-server Option
WebSAM/Netvisor, and others
NEC ESMPRO Manager
NEC ESMPRO Agent
121

Advertisement

Table of Contents
loading

This manual is also suitable for:

Express5800 a1040bExpress5800 a2020bExpress5800 a2040b

Table of Contents