Chapter 3 Setup
Shown below are examples for conditional display.
Ex. 1) Display the access log whose username is administrator.
show user==Administrator
Ex. 2) Display the access log whose IP address is 192.168.1.100 and protocol is HTTP and event is error.
show ipaddress==192.168.1.100,protocol==HTTP,event==error
Ex. 3) Display 100 tail logs whose timestamp is 01/01/2010 and protocol is HTTPS.
show -oemnec_taillog 100 timestamp==01/01/2010,protocol==HTTPS
Tips
8.9.2 Clearing access log
Enter the following command at the command prompt to move the current default target to
/admin1/sp1/log1/record1.
cd /admin1/sp1/log1/record1
Enter the following command.
delete
422
•
The "user" cannot be used as condition for access logs that does not contain user
information.
•
Access log might not be correctly displayed with timestamp condition for the logs
recorded from AC ON to DC ON of the server.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
8. SMASH-CLP