Chapter 4 Appendix
Operation mode
Quiet Boot
Bootup NumLock
State
Setup Prompt Timeout
Boot Mode
Parameter
([ ]: Default setting)
Disabled
[Enabled]
On
[Off]
[0]
(Allowable range: 0-65535
sec)
[UEFI Mode]
Legacy Mode
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
When
applied
At next boot
Enable or disable the feature to display NEC logo
during POST. When set to [Disabled], POST
execution result is displayed instead of logo.
When [BIOS Redirection Port] is enabled, this
item shows [Unavailable] and becomes
inaccessible ([Disabled] is set automatically).
At next boot
Enable or disable NumLock feature of keyboard.
You can select voluntarily to fit your purpose.
At next boot
Set waiting time for <F2> key entry used to
launch SETUP. You can select voluntarily
between 0 and 65535 seconds. If the larger value
is specified, it takes long time to automatically
startup unless the <F2> key is pressed.
Specify the boot mode of OS.Specify UEFI Mode
At next boot
in this server (Legacy Mode cannot be chosen).
2. Operation Mode
Description
485