Optical Disk Drive; Installation - NEC express5800 A2010b User Manual

Chapter 2 Preparations
1.7

Optical Disk Drive

This section describes the procedure for installing the optical disk drive.

1.7.1 Installation

Install an optical disk drive in the following procedure.
1. Set to the maintenance mode. See Chapter 3 (7.7.1 BMC – (7) Extended Functionality) for details.
2. Refer to Steps 3 to 4 in Chapter 2 (1.4 Overview of Installation and Removal) for preparations.
3. Insert the optical disk drive into the slot of optical disk drive.
4. Push the optical disk drive completely until the lock levers on both ends are locked with clicks.
Important Do not install any unsupported optical disk drive.
Optical disk drive
Important Insert the optical disk drive straight into the slot. If the drive is inserted obliquely or
applied excess force, the optical disk drive and internal connector may be damaged.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
1. Installing / Removing Internal Options
165