Chapter 3 Setup
Edit page (when IPv6 is disabled)
On the Edit page as shown below, you can configure the following function. You cannot specify IPv6 link local
address.
•
Select Enable or disable IPv6.
Edit page (when IPv6 is enabled and Dynamic is specified for IPv6 address assign mode)
On the Edit page as shown below, you can configure the following function. You cannot specify IPv6 link local
address.
•
Select Enable or disable IPv6.
•
Select Static or Dynamic for IPv6 Address Assign Mode.
Edit page (when IPv6 is enabled and Static is specified for IPv6 address assign mode)
On the Edit page as shown below, you can configure the following function. You cannot specify IPv6 link local
address.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
7. Using Remote Management
323