NEC express5800 A2010b User Manual page 285

Chapter 3 Setup
1. Use editor to open /etc/X11/xorg.conf file and check if the following is described in Section "Device"
(indicating graphic device). If it is not found, add the description.
Option "HWCursor" "off"
(Reference)
Section "Device"
Identifier "Matrox Millennium G200"
Driver "mga"
VendorName "Videocard vendor"
BoardName "Matrox G200e"
Option "HWCursor" "off"
EndSection
2. Save and exit the editor, and restart OS of the server.
(11)
Window operation is unable
Access from remote media window fails, or window does not open even when features such as IPMI information
and Remote KVM/Media is selected.
→ Restart the browser.
→ If the same error persists, delete temporary Internet file on Jave Control Panel.
(12)
Browser terminates abnormally
→ Confirm operating environment of remote terminal.
(13)
Remote KVM/media is launched doubly
When remote KVM/media is automatically launched doubly on Internet Explorer, close the latter one. Then the
former one can work normally. To avoid double launch, disable the SmartScreen Filter feature.
(14)
Remote KVM is disconnected
If the resolution of server side is frequently changed while the remote KVM is running, connection may be lost in
rare cases. In such as case, restart the remote KVM.
(15)
IPMI information is not displayed on RHEL
When using https login on RHEL Firefox, IPMI information (SEL, SDR, FRU, MC, and Backup) is not displayed
immediately after the login. Wait for 60 seconds or longer, and try again.
(16)
"Network" menu on Internet Explorer 8
If you leave the "Network" menu opened with the Auto Refresh being enabled, memory utilization of browser
keeps increasing. Thus the browser does not work smoothly or forcedly logged out. In this case, restart the
browser after logout, and login again.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
5. EXPRESSSCOPE Engine SP3
285